Thegenlockadjustmentisperformedtoachievephasealignmentby
applyingexternalsynchronization(genlock)whenamultiplenumberof
cameraswillbeusedorwhentheunitwillbeusedincombinationwith
otherdevices.
ThisunitsupportsBBS(BlackBurstSync)andtri-levelsyncexternal
synchronizationsignals.
Askyourdealertoperformthisadjustment.
(Useadual-traceoscilloscopefortheadjustment.)
Horizontal phase adjustment
Observethewaveformsoftheexternalsyncsignalinput(tri-levelsync
signal)andvideosignaloutputonthedual-traceoscilloscope,anduse
thewirelessremotecontrolorcontrollertobringthehorizontalphase
intoalignment.
External sync signal
input
(tri-level sync signal)
Video signal output
Bring the horizontal
phase into alignment.
Example: When the tri-level sync phase is adjusted
When performing operations from a wireless
remote control
1. Follow the operation steps in “Basic operations” (→
page 37) to display the Top Menu.
2. Press the <4> or <5> button to bring the cursor to
[System].
Top Menu
Camera Scene: Scene1
System
Maintenance
3. Press the <M> button.
The[System]screenappears.
System
Genlock
Output
Others
Return
4. Press the <4> or <5> button to bring the cursor to
[Genlock], and press the <M> button.
The[Genlock]sub-menuisdisplayed.
Genlock
Horizontal Phase 0
Horizontal Phase Step 1
Return
5. Press the <4> or <5> button to bring the cursor to
[Horizontal Phase], and press the <M> button.
The[HorizontalPhase]valuestartsblinking.
6. Press the <4> or <5> button to change the [Horizontal
Phase] value, adjust the value so that the horizontal
phase is brought into alignment, and press the <M>
button.
Theextentofthephaseadjustmentcanbeselectedusing[Horizontal
PhaseStep].
7. Press and hold the <MENU> button for about 2 seconds.
Thecameramenudisplayisexited.
When performing operations from a controller
Theseoperationscanbeperformedusingthecameramenusby
followingtheoperationstepsin“Basicoperations”“Basicoperations”
(→pages37to46).
Genlock adjustment
36
37