Panasonic AW-HE130K Home Security System User Manual


  Open as PDF
of 126
 
Theblacklevelcanbeadjustedwhenusingamultiplenumberof
camerasincludingtheunit.Askyourdealertoperformthisadjustment.
(Useanoscilloscopeorwaveformmonitorfortheadjustment.)
Adjusttheblacklevelinaccordancewiththeunitsanddevicesused.
When performing operations from a wireless
remote control
1. Press the <M/IRIS> button.
Settheiristothemanualmode.
2. Press the <IRIS –> button.
Thelensirisisstoppeddown.
3. Press the <4> or <5> button to bring the cursor to
[Picture].
4. Press the <M> button.
The[Picture1/3]sub-menuisdisplayed.
Picture 1/3
Chroma Level 0%
White Balance Mode AWB A
Color Temperature 3200K
R Gain 0
B Gain 0
Pedestal 16
R Pedestal 0
B Pedestal 0
Return
5. Press the <4> or <5> button to bring the cursor to
[Pedestal].
Picture 1/3
Chroma Level 0%
White Balance Mode AWB A
Color Temperature 3200K
R Gain 0
B Gain 0
Pedestal 16
R Pedestal 0
B Pedestal 0
Return
6. Press the <M> button to start the “Pedestal” value
blinking.
7. Press the <4> or <5> button, change the [Pedestal]
value, and press the <M> button to enter the selection.
Adjustthevaluesothatitmatchestheblacklevel.
Thepedestalvaluescanbeadjustedfinelyusingthe[RPedestal]and
[BPedestal]settings.(→page@@)
8. Press and hold the <MENU> button for about 2 seconds.
Thecameramenudisplayisexited.
9. If necessary, press the [A/IRIS] button to adjust the iris
automatically.
When performing operations from a controller
When using a AW-RP50, AW-RP120, or AK-HRP200
Refertotheoperatinginstructionsforthecontroller.
Black level (master pedestal) adjustment
34
35
 previous next