Panasonic AW-HE130K Home Security System User Manual


  Open as PDF
of 126
 
<NOTE>
•Ifthepersonalcomputerdoesnothavetheplug-inviewersoftware
alreadyinstalled,aninstallationconfirmationmessageisdisplayed
beforetheLivescreenisdisplayed.Inacaselikethis,followthe
on-screeninstructionstoinstallthesoftware.
Forfurtherdetails,referto“Plug-inviewersoftware(Network
CameraView4S)”(→page@@).
•When“UserAuthentication”(→page@@)issetto“On”,theuser
nameandpasswordinputscreenisdisplayedbeforetheLive
screenpageappears.
Thedefaultsettingsfortheusernameandpasswordareasfollows.
User name admin
Password 12345
•Whiletheinitialsettingsremainusedfortheusernameand
password,amessagepromptingtheusertochangetheusername
andpasswordisdisplayedafterauthorization.Inordertoensure
security,thepasswordfortheusernameof“admin”mustbe
changedwithoutfail.Itisalsorecommendedthatthepasswordbe
changedatregularintervals.
•WhenanattemptismadetodisplaymultipleH.264imagesonone
personalcomputer,IPvideosmaynotbedisplayeddependingon
theperformanceofthepersonalcomputerconcerned.
•Whenanitemwhichisunderlinedonthescreenisclicked,a
separatewindowopens,andaninputexampleisdisplayed.
•Upto14users(consistingofusersreceivingH.264imagesand
usersreceivingJPEGimages)canaccesstheunitatthesame
time.However,thenumberofusersthatcanaccesstheunitmay
belessthan14dependingonthe[Bandwidthcontrol(bitrate)]
and[Maxbitrate(perclient)]settings.Amessageindicatingthe
accesslimitwillappearifthenumberofusersexceeds14.When
[Transmissiontype]issetto[Multicastport]for[H.264],thesecond
andsubsequentusersreceivingH.264imageswillnotbecounted
towardthetotalaccesscount.
•When[H.264transmission](→page@@)issetto[ON],H.264
imagesaredisplayed.Whenitissetto[Off],JPEGimageswill
bedisplayed.JPEGimagescanbedisplayedevenwhen[H.264
transmission]issetto[On].Insuchcases,however,themaximum
framerateoftheJPEGimageswillbe5fps.
•TheJPEGimageframeratemaybeslowerdependingonthe
networkenvironment,performanceofyourcomputer,subjectofthe
video,andaccessvolume.
<JPEG image frame rate>
When [H.264 transmission] is set to [On]
Upto5fps
When [H.264 transmission] is set to [Off]
Upto30fps
Switching between the Live screen and Setup
screen
WhentheLivescreenisdisplayed,clickthe button.
FordetailsontheSetupscreen,see“Setupscreen”(→page@@).
WhentheSetupscreenisdisplayed,clickthe button.
FordetailsontheLivescreen,see“Livescreen”(→page@@).
64 65
Displaying the web screen (continued)
 previous next