35
UNIT MODEL NUMBER________________
Minimum Clearances per Table 3? ________
Electrical Connections tight? _____________
Line Voltage Polarity correct? ____________
Supply Voltage: ___________________ Volts
Blower Motor HP: _____________________
FUEL TYPE:
Natural Gas ______ LP/Propane _______
Gas Piping Connections leak-tested? _____
Gas Line Pressure: ____________________
(in. water column, with furnace operating)
Manifold Pressure: ____________________
(in. water column, with furnace operating)
Is there adequate fresh air supply for
combustion and ventilation? _____________
Furnace Input: _________________ (Btuh)
Supply Air Temperature: __________ (° F)
Return Air Temperature: _________ (° F)
Temperature Rise: ______________ (° F)
UNIT SERIAL NUMBER________________
Are Flue Connections tight? _____________
Is there Proper Draft?__________________
Is Vent free from restrictions? ____________
Is the Filter(s) secured in place? __________
Is the Filter(s) clean? __________________
Has the Thermostat been calibrated? _____
Is the Thermostat level? ________________
Is the Heat Anticipator Setting correct? ____
Has the Owner's Information been reviewed
with the home-owner? _________________
Has the Literature Package been left near the
furnace? ____________________________
LOCATION ____________________ CITY __________________ STATE ____________
INSTALLER ___________________ CITY __________________ STATE ____________
INSTALLATION/PERFORMANCE CHECK LIST