Heat & Glo LifeStyle 8000CL-IPI-T Indoor Fireplace User Manual


  Open as PDF
of 82
 
55
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. S • 9/12
DOOR
FINISHING
MATERIAL
FINISHING
MATERIAL
C
(Includes 1/8 in. opening each side of door)
A
(Outside door width)
Finishing material thickness, 1-4 inches maximum
B = Top of door to bottom of replace.
D = Bottom of Finishing Material to Bottom of Fireplace
A
(Outside door width)
B
C
(Includes 1/8 in. opening each side of door)
D
FINISHING
STRIPS USED
NON-COMBUSTIBLE
FINISHING MATERIAL
Figure13.6Folio/CFInsideFit
FINISHING STRIP NOT USED
(See Figure 13.7 for
removal instructions)
NON-COMBUSTIBLE
FINISHING MATERIAL
Figure13.5FinishingMaterialThicknessGreaterThanOneInch
DOOR
FINISHING MATERIALFINISHING MATERIAL
8000Models 6000Models
Inches Millimeters Inches Millimeters
A 44-1/16 1119 37-1/16 941
B 35-15/16 913 34-1/16 865
C 44-5/16 1126 37-5/16 948
D 36-5/16 922 34-7/16 882
FinishingMaterialThickness:
1-4inchesmaximum
NOTICE: Remove nishing strips before ring appliance.
NOTICE: Remove nishing strips before ring appliance.
FinishingMaterialThickness:
0-4inchesmaximum
 previous next