29
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. S • 9/12
FLUE
RESTRICTOR
TOP
REFRACTORY
TopVent-VerticalTermination
NoElbow
Figure7.6
Note:If installing a vertical vent/
termination off the top of the appli-
ance, the ue restrictor should be
used. See Figure 7.9.
V
1
V
1
=40ft.Max.(12.4m)
V
1
=3ft.Min.(914mm)
Figure7.8FlueRestrictor
2. Break the ue restrictor into two pieces. Do this by
bending the part back and forth until it breaks (see
Figure 7.8).
Figure7.7
BREAK
HERE
FlueRestrictorInstructions
1. Remove the top piece of refractory, if already installed.
See Figure 7.7.