Filter
Top Products
47
Heat & Glo • SL-550 / 750 / 950TR-D • InD • 2044-985 Rev. M • 10/06
LOG #3 (SRV530-718): Place log #3 on the left two grate bars using the notches in the bottom of the log. Position
log parallel to log #1 and on the same line as log #2. Left edge of log should rest between grate bar and second tab.
LOG #4 (SRV2045-703): Place log #4 on top of log #1 and log #2 so that the cutouts on the bottom of log #4 fi t
on the tab on log #1 and will fi t in the fl at spot on log #2.
LOG #5 (SRV2045-702): Place log #5 on the tab on log #1 so that the cutouts on the bottom of log #5 fi t onto the
raised fl at spots on log #2.
NOTCHES
RAISED FLAT SPOTS
RAISED FLAT SPOTS
5
4
3
TAB LOCATOR
TAB LOCATOR