Filter
Top Products
Heat & Glo • SL-550 / 750 / 950TR-D • InD • 2044-985 Rev. M • 10/0644
Log Set Assembly: LOGS-SL550-DD. Positioning the Logs
If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.
Carefully remove the logs from the packaging. CAUTION:
Logs are fragile!
LOG #1 (SRV2044-700): Place log #1 onto the grate bars so that the notches in the bottom of the log fi t onto
the grate bars. Slide the log to the front tab for NG, slide to the rear tab for LP.
1
TABS
1
LOG #2 (SRV550-717): Place log #2 on the right two grate bars using the notch on the bottom of log #2. Slide the
right edge of log #2 forward until it touches the grate.
NOTCH
2
NOTCHES
METAL TABS
2
3
4
5
Models: SL-550TR-D