Filter
Top Products
5-4 BE-1204B-BC • BE-1206B-BC
Chapter 5 Setting
Setting of Needle Bars
Needle bars allocated in the sequence of sewing can be modified.
! This setting is explained on the basis of the BE-1206B-BC screen.
! Either feedhold or hoop retract can be inserted.
1. Press
.
2. Select a sewing sequence to modify by pressing
.
The current embroidering sequence is selected while embroidering is interrupted.
W0481Q
Press for modifying all sequences at one time.
W0482Q
3. Input the number of a needle bar by pressing ten keys.
When inputting a numerical figure exceeding 10, press the first.
W0483Q
Insertion of Feedhold
Press
to highlight the position right next to the position to insert the feedhold, then press .
W0484Q
Insertion of Hoop Retract
Press
to highlight the position right next to the position to insert the hoop retract, then press .
W0486Q