Filter
Top Products
4-10 BE-1204B-BC • BE-1206B-BC
Chapter 4 Editing of Embroidering Data
Other Editing
Setting of other functions related to editing is available.
The following types of setting is available.
0 stitch deletion For deleting stitches at the same point without stepping forward or back.
This function is previously set to
(for deleting 0stitch) upon shipment.
For deleting 0 stitch
For not deleting 0 stitch
Thread trimming feed
number
For setting the number of feeds for thread trimming
This function is previously set to
(ECS data) or (Except ECS data)
upon shipment.
~ For thread trimming at the number of feeds indicated on the icon
For not thread trimming by feeding
Swing width correction For setting the needle swing width correction amount
The correction amount can be set in increments of 0.1mm.
The setting range is -0.5 ~ 2.0mm in both the X and Y directions. (The setting
range is displayed as "-5 ~ 20" on the screen.)
This function is previously set to 0(no swing width correction) upon shipment.
1. Read sewing data.
2. Press
three times.
0 Stitch Deletion
3. Select this function by pressing
.
W0601Q
4. Press after setting is finished.
Press when setting continuously.
W0602Q
Thread Trimming Feed Number
3. Select this function by pressing
.
W0601Q