Filter
Top Products
BE-1204B-BC • BE-1206B-BC 3-21
Chapter 3 Selection of Data and Embroidering
Writing the embroidering data
The embroidering data stored in the memory of the machine is written to the floppy disk.
! The format of the data to be written is brother ESC or TAJIMA TFD.
1. Press the
button.
The embroidering data stored in the memory is displayed.
2. The list of the embroidering data is displayed. Select the screen by pressing .
W0476Q
3. Select the embroidering data to be written with numeric keys or
.
W0480Q
4. Press the button.
5. Designate the thread trimming feed number with
.
It cannot be designated when the ECS data format is selected.
Use numeric keys,
, or the button to change the file name.
In any data format other than the ECS format In the ECS data format
W0599Q W0448Q
6. Highlight the icon of the data format with and designate the format of the data to be written
with
.
7. Highlight the edit value validating or invalidating icon with
and designate validating or
invalidating of the edit value with
.
8. Set the formatted floppy disk.