Filter
Top Products
BE-1204B-BC • BE-1206B-BC 5-33
Chapter 5 Setting
Invalidating speed limit in a short pitch
1. Press the
button after the setting screen is displayed.
W0571Q
2. Press the button.
The changed settings are stored and the previous screen is displayed.
W0572Q
Feed Timing
The timing of needle drop and hoop movement can be adjusted according to the cloth thickness.
! The value can be designated between 95 and 125 degrees (85 to 115 degrees for cap hoop) in 1-
degree units. The smaller values are suitable for thick material and the larger ones are suitable for
thin material. The standard value is 110 degrees (100 degrees for cap hoop).
1. Press
twice.
2. Select
with .
W0638Q
3. Press .
W0639Q
4. Designate the feed end angle with .
W0575Q
5. Press the button.
The changed settings are stored and the previous screen is displayed.
W0576Q