Filter
Top Products
5-2 BE-1204B-BC • BE-1206B-BC
Chapter 5 Setting
What Can the Machine Do?
Setting of Needle Bars
Needle bars allocated in the sequence of embroidering (→ Page 5-4)
Setting of Thread Breakage Sensor
Thread breakage sensor ON/OFF (→ Page 5-6)
Thread breakage sensitivity (→ Page 5-6)
Number of stitches in automatic step back (→ Page 5-7)
Display of total stitch number in automatic step back (→ Page 5-7)
Lower thread counter counts (→ Page 5-8)
Stitch counter indication (→ Page 5-8)
Setting of Machine
Selection of embroidery hoop (→ Page 5-9)
Speed range (→ Page 5-10)
Speed in speed range (→ Page 5-11)
Thread trimming length (→ Page 5-14)
Thread removal feed length (→ Page 5-15)
Inching ON/OFF (→ Page 5-16)
Sewing area (→ Page 5-17)
Resetting of thread breakage error (→ Page 5-12)
Needle bar stop at mending stop point (→ Page 5-12)
Method of thread trimming before thread breakage error (→ Page 5-12)
Method of thread trimming before stop (→ Page 5-12)
Setting of Environment
Return to start point after embroidering end (→ Page 5-20)
Method of reflecting modified machine speed (→ Page 5-21)
Method of checking the embroidery area (→ Page 5-21)
Slow sewing needle number at start-up (→ Page 5-22)
Data transfer speed (→ Page 5-23)
Display language (→ Page 5-24)
Alarm sound (→ Page 5-25)
Motive speed (→ Page 5-26)
Small-pitch deletion (→ Page 5-27)
Auto pause ins. (→ Page 5-28)