Filter
Top Products
5-14 BE-1204B-BC • BE-1206B-BC
Chapter 5 Setting
Thread Trimming Length
Length of thread to leave on the needle bar after thread trimming can be set for each needle bar.
! This function is previously set to 5 upon shipments.
1. Press
.
2. Select
by pressing
.
W0609Q
3. Press .
W0613Q
4. Select a needle bar to modify by pressing
.
W0511Q
Press for setting the same speed range for all needle bars.
W0512Q
5. Input thread length by pressing ten keys.
Thread length can be input within the range of 1 ~ 10. Length decreases as the figure decreases.
When inputting "10", press the
first.
W0513Q
6. After setting is finished with all needle bars, press .
Modified setting is saved and the previous screen is displayed again.
W0514Q