Filter
Top Products
BE-1204B-BC • BE-1206B-BC 5-19
Chapter 5 Setting
Hoop Automatic Retract
Set whether to move the hoop automatically to the retract point at the end of sewing.
! This function is previously set to no hoop automatic retract upon shipments.
1. Press
.
2. Select whether to retract the hoop automatically by pressing
.
For automatically retracting the hoop
W0526Q
For not retracting the hoop automatically
W0527Q
3. Press .
Modified setting is saved and the initial screen or halt screen is displayed again.
Movement to Registered Sewing Start Point
This operation should be done before starting sewing.
1. Hold down
and press .
2. The hoop moves and the zero point is detected. Then the hoop moves to a registered start point.
W0617Q
W0618Q
W0619Q
3. The initial screen is displayed again.