Filter
Top Products
BE-1204B-BC • BE-1206B-BC 2-9
Chapter 2 Embroidering Procedures
Retrieve the Embroidery Data
The description in this section is based on the method of reading data which is registered in the
memory unit of the machine.
Refer to "Selection of Data" (→ Page 3-3) for details.
1. Press
switch.
Data saved in the machine is displayed.
2. Select a screen by pressing
keys, and select required data by pressing ten keys or
.
When using ten keys for data selection, input a numerical figure (1 ~ 9) which indicates each data
name. Required embroidery data is selected and read.
W0397Q
3. Press key.
Required embroidery data is selected and read.
W0405Q
Selected embroidery data is read.
W0406Q
Start Embroidering
1. Press to check the embroidering area.
2. Press
to start embroidering.
W0406Q
Sewing is started and the next screen is displayed.
W0439Q