Filter
Top Products
5-18 BE-1204B-BC • BE-1206B-BC
Chapter 5 Setting
Registration of Sewing Start Position
Register a position to start sewing.
! When returning to a registered sewing start position, hold down
and press .
1. Press the
key.
The hoop coordinates are displayed.
W0522Q
2. Shift the hoop to a position to start sewing by pressing the
.
W0523Q
3. Press .
4. Press the
key.
W0616Q
Hoop Retract Point
The hoop basic point (retract point) can be set when sewing is interrupted.
! When restarting sewing after the hoop is retracted during an interrupt, press
.
1. Press
.
2. Move the hoop by pressing
.
W0525Q
3. Press .
Modified setting is saved and the initial screen or halt screen is displayed again.
The hoop returns to the initial point.
Cancellation of Setting
1. Press
once again.
Modified setting is canceled and the initial screen or halt screen is displayed again. The hoop returns
to the initial point.
Current hoo
p
coordinates