Filter
Top Products
CHANGING THE NEEDLE
58
About the Needle
The sewing machine needle is probably the most important part of the sewing machine. Choosing the
proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some
things to keep in mind about needles.
• The smaller the needle number, the finer the needle. As the numbers increase, the needles get thicker.
• Use fine needles with lightweight fabrics, and thicker needles with heavyweight fabrics.
• To avoid skipped stitches, use ball point needle (golden colored) 90/14 with stretch fabrics.
• To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing character or decorative
stitches.
• Use needle 75/11 for embroidery. Use ball point needle 75/11 for embroidering patterns with short jump
stitches such as alphabet characters when the thread trimming function is turned on.
• Ball point needles (golden colored) 90/14 are not recommended for embroidery, as they may bend or break,
causing injury.
• It is recommended that a 90/14 needle should be used when embroidering on heavyweight fabrics or
stabilizing products (for example, denim, puffy foam, etc.). A 75/11 needle may bend or break, which could
result in injury.
• A home sewing machine needle 75/11 is inserted in the sewing machine.
Fabric/Thread/Needle Combinations
The following table provides information concerning the appropriate thread and needle for various
fabrics. Please refer to this table when selecting a thread and needle for the fabric you wish to use.
Fabric type/Application
Thread
Size of needle
Type Size
Medium weight fabrics Broadcloth Cotton thread
60 - 90
75/11 - 90/14Taffeta Synthetic thread
Flannel, Gabardine Silk thread 50
Thin fabrics Lawn Cotton thread
60 - 90
65/9 - 75/11Georgette Synthetic thread
Challis, Satin Silk thread 50
Thick fabrics Denim Cotton thread 30
90/14 - 100/16
50
Corduroy Synthetic thread
50 - 60
Tweed Silk thread
Stretch fabrics Jersey Thread for knits
50 - 60
Ball point needle
(gold colored)
75/11 - 90/14
Tr i co t
Easily frayed fabrics Cotton thread
50 - 90
65/9 - 90/14Synthetic thread
Silk thread 50
For top-stitching Synthetic thread
50 90/14 - 100/16
Silk thread
Memo
• For transparent monofilament nylon thread, always use needle sizes 90/14 or 100/16.
The same thread is usually used for the bobbin thread and upper thread.
CAUTION
• Be sure to follow the needle, thread, and fabric combinations listed in the table. Using an improper
combination, especially a heavyweight fabric (i.e., denim) with a small needle (i.e., 65/9 - 75/11), may
cause the needle to bend or break, and lead to injury. Also, the seam may be uneven, the fabric may
pucker, or the machine may skip stitches.