Brother 882-W02 Sewing Machine User Manual


 
SEWING THE STITCHES
120
d
Press to create a mirror image of the
stitch.
e
Match beginning needle drop points on the
opposite edge of the open area to keep the
stitching symmetrical.
Hemstitching (3) (Drawn Work (2))
a
Pull out several threads from both sides of
the 4 mm (approx. 3/16 inch) area which
are not yet open.
* Pull out four threads, leave five threads, and then
pull out four threads. The width of five threads is
approximately 4 mm (approx. 3/16 inch) or less.
a Approx. 4 mm (approx. 3/16 inch) or less
b Four threads (pull out)
c Five threads (leave)
b
Select .
c
Sew the decorative stitch in the center of
the five threads created above.
Memo
For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of
this manual.
Memo
A wing needle can be used for Hemstitching
(3).