Brother 882-W02 Sewing Machine User Manual


 
SEWING STITCH PATTERNS
Character/Decorative Stitches
153
4
e
Press the “Start/Stop” button to stop
sewing.
f
Press the “Reverse/Reinforcement Stitch”
button to sew reinforcement stitches.
Making Adjustments
Your stitch pattern may sometimes turn out poorly,
depending on the type or thickness of fabric, the
stabilizer material used, sewing speed, etc. If your
sewing does not turn out well, sew trial stitches
using the same conditions as the real sewing, and
adjust the stitch pattern as explained below. If the
pattern does not turn out well even after making
adjustments based on the pattern, make
adjustments for each pattern individually.
a
Press and select on 16/16.
Memo
If the fabric is pulled or pushed during sew-
ing, the pattern may not turn out correctly.
Also, depending on the pattern, there may
be movement to the left and right as well as
front and back. Guide the fabric with your
hand to keep the fabric feeding straight and
even during sewing.
Memo
When sewing character stitches, the
machine automatically sews reinforcement
stitches at the beginning and end of each
character.
When sewing is completed, trim any excess
thread between letters.
Note
When sewing some patterns, the needle will
temporarily pause in the raised position
while the fabric is fed due to the operation of
the needle bar separation mechanism which
is used in this machine. At such times, a
clicking sound different from the sound gen-
erated during sewing will be heard. This
sound is normal and is not the sign of a mal-
function.