Filter
Top Products
38 en | Settings Tree Options CTFID
F.01U.141.545 | 3.09 | 2009.10 User’s Manual Bosch Security Systems, Inc.
Auto Iris Automatically adjusts the lens to
allow the correct illumination of
the camera sensor. This type of
lens is recommended for use
where there are low light or
changing light conditions.
Options include:
Constant: Sets the auto iris
function to a constant value for
auto iris operation.
Manual: Disables the auto iris
function and sets the iris control
for manual operation.
G3A Series, ENV Series,
VG4 Series
Constant Constant, Manual
Auto Iris Level Increases or decreases
brightness according to the
amount of light.
G3A Series, ENV Series,
VG4 Series
81 to 15
Auto Pan Speed Continuously pans the camera at
a speed between right and left
limit settings.
G3A Series, ENV Series,
VG4 Series
30 1 to 60
Auto Pivot Tilts the camera through the
vertical position as the camera is
rotated to maintain the correct
orientation of the image.
G3A Series, ENV Series,
VG4 Series
On On, Off
Auto SensUP Max Sets the limit for sensitivity when
the shutter speed is set to Auto
SensUP.
VG4 Series 15x 2x, 4x, 7.5x, 15x
AUX Enters the Aux Command dialog
box where you send control
commands to the camera.
VG4 Series 0 0-99 See
Section 8 AUX
Keyboard
Commands,
page 53.
B-gain Adjusts the blue gain to optimize
the white point.
Dinion 2X,
Dinion
XF
LTC 0485,
LTC 0610,
LTC 0495,
LTC 0620,
Dinion LTC 0435,
LTC 0455,
FlexiDome VF VDC-445
and XT, FlexiDome 2X
VDC-455, Unity Dome,
UPH Series
0-5 to +5
Backlight
Compensation
(BLC)
Optimizes the video level for the
selected area of the image. Parts
outside this area may be
underexposed or overexposed.
G3A Series, ENV Series,
VG4 Series,
Dinion
XF
, Dinion
FlexiDome, Unity
Off On, Off
Feature Description Device Default Options