Filter
Top Products
22 en | Using the Configuration Tool CTFID
F.01U.141.545 | 3.09 | 2009.10 User’s Manual Bosch Security Systems, Inc.
Dinion Virtual Keyboard
Place the cursor on the Enter control (see #5 Figure 4.6), then click once to open the Mode
menu; click once to open the submenus. Click and hold to open the Install menu; click once to
open the submenus.
Figure 4.6 Dinion Virtual Keyboard window
4.1.5 AUX Commands Dialog Box
When you click the AUX button, the AUX Commands dialog box opens. The AUX Commands
dialog box is designed to simulate the hardware keypad, and allows direct entry of the AUX
command.
To enter an AUX command:
1. Select the command type radio button on the left.
2. Enter the four-digit number in the Shot # field (or click the four numerals via the keypad).
3. Click Enter.
– The command is sent to the device. For a list of AutoDome and Dinion keyboard
commands, refer to Chapter 8.
–Although the AUX button is active for the FlexiDome and Unity Dome Series, no
additional commands are available.
–The AUX button is disabled for Dinion mid-range models (Dinion LTC 0355, Dinion
LTC 0356, Dinion LTC 0435, Dinion LTC 0455, FlexiDome VF VDM-345 Series,
Number Button Description
1 Pan/Tilt Moves the cursor up.
2 Pan/Tilt Moves the cursor to the right.
3 Pan/Tilt Moves the cursor down.
4 Pan/Tilt Moves the cursor to the left.
5 Enter Opens menus and functions as an enter button.
6 AUX Opens the AUX Commands dialog box.