Filter
Top Products
In this case Description and where to check
Vapor or condensation appear
Indoor unit
Vapor appears.
These are not faults
•
Vapor may appear due to the rapidly cooled air in the room.
•
Vapor may appear due to condensed water on the heat exchanger, or the panel may
become moist during cooling, dry, or cleaning.
Condensation appears.
•
Are the vertical direction louvers closed or pointing downward? Condensation may
form if operated for a long time in the downward rather than horizontal position
during cooling or dry.
Outdoor unit
Frost, water, or steam appears.
•
Water may drip during cooling or dry. This is water condensed from the air settling on
the cool piping.
Filter cleaning
Filter is not clean.
(Dust has accumulated on the air fi lter).
Check again
•
It may be due to an incomplete insertion of the air fi lter.
Remove the air fi lter, re-insert it, and perform a test operating run.
Page 30, 31
•
Automatic operation is not performed in the following cases.
After stopping the operation, turn off the power supply frequently.
After stopping the operation, is pressed more 2 times.
The air conditioner is operated continuously.
Odor or dirt
Bad odor in the room.
These are not
faults
•
Because the odor in the wall, carpet, furniture or clothes may be due to natural air
circulation.
•
Smell may be created by the ozone generated during Picoion air purifi er.
The horizontal direction louvers are stained.
•
Dirt may adhere to the horizontal direction louvers near the Picoion generator due to
static electricity and the color may darken. Clean around the Picoion generator.
38
1110650159_(31-38)_EN.indd 38
1110650159_(31-38)_EN.indd 38
2/28/11 2:11 PM
2/28/11 2:11 PM