Filter
Top Products
Test run after care and cleaning
Turn on power supply after cleaning the air fi lter, dust box
and brush unit then perform a test run.
1
(Blue) (Orange)
2
Press again for approx. 1 second
•
Automatic operation stops.
3
Close the front panel (Check that it is closed)
•
If the front panel is open, the air fi lter may not function correctly.
4
Press
CHECK
on the remote controller for 10 seconds
or longer
is displayed in the remote controller display for approx 2 seconds.
•
Operation of the air fi lter is checked automatically for approx. 3 minutes.
<Display portion of indoor unit>
5
Check the lamp in the Indoor unit display
•
All lamps are turn off for normal.
•
DUST BOX and TIMER lamp blink. It may be a fault with the air fi lter setting.
Press
to turn off the lamp.
•
Perform removal and assembling of the air fi lter again.
Page 30
•
Return to 4 after setting and check that the fi lter cleaning functions normally.
Until it switches
to Automatic
operation
Approx.
1 second
Illuminated in sequence
1
Turns off power supply.
2
Remove the batteries from the remote
controller
•
If left inserted, they may cause a leakage of
battery fl uid or power discharge.
1
Check that the indoor unit and outdoor unit
are clear
•
If blocked, performance may be impaired
or may not function.
2
Insert new batteries into the remote
controller and set the year, month, day and
time
3
Turns on power supply.
When not used for a long time
When restarting for use
Page 9
(Blue) (Orange)
Care and cleaning
(continued)
31
1110650159_(31-38)_EN.indd 31
1110650159_(31-38)_EN.indd 31
2/28/11 2:11 PM
2/28/11 2:11 PM