Filter
Top Products
•
Every time...
Swing direction changes.
When changing the air for vertical
direction, release the left side at
the desired position.
(
PiPi
at the lower limit).
When changing the air for
horizontal direction, release
the right side at the desired
position.
(
PiPi
sounds at the front).
Setting for air fl ow Page 17, 18
•
Comfort air direction can be selected as a Direct air fl ow, Indirect air fl ow, Wide air fl ow and
Spot air fl ow.
Air volume, Fix and Swing
Movement of vertical air
direction louvers
The louvers reverse
in this range.
Means
the range of
movement.
•
Every time...
When pressed during Auto, Cooling, Fan only and PURE.
When changing the air volume, press FAN
FAN
•
When the air volume is set to “Quiet ( )”, the air volume becomes “Automatic”.
When changing the air direction, press FIX
•
Every time when pressed, the vertical and horizontal louver modes change one step.
•
Do not move the air direction louvers by hand but be sure to adjust using the remote controller.
FIX FIX
When swing, press Swing
•
When changing the middle vertical direction louver, press the
FIX
button and to change the middle
horizontal direction louver, press the
FIX
button again. To know the air direction easily, release the
Swing functions.
SWING
Horizontal
(Left-Right)
Swing
Vertical
(Up-Down)
Swing
Up-Down
Left-Right
Swing
Swing
off
Pi Pi PiPi
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
POWER SEL
˚C
When
PiPi
sounds,
it indicates the operation setting returns to the original
setting.
Page 7
16
1110650159_(11-20)_EN.indd 16
1110650159_(11-20)_EN.indd 16
2/28/11 2:10 PM
2/28/11 2:10 PM