Filter
Top Products
Air filter
Care and cleaning
(continued)
Turns off power supply before checking,
care and cleaning
30
How to remove
1. Slide the 2 levers on the fi lter
cover toward the open direction
(
mark).
2. Hold the center of the fi lter
cover and open upward until the
fi xed position.
3. Remove the air fi lter.
How to assemble
1. Insert the air fi lter.
Point!
•
Insert the air fi lter in the front side from your
side.
•
Insert until the end of the fi lter touches the
bottom.
2. Close the fi lter cover.
3. Slide the levers on the fi lter cover
(white) toward the close direction
(
mark) and secure.
Point!
•
Check that the 2 levers on the fi lter cover are
fi xed securely. If these are not locked in the
direction of
, the fi lter may not function.
Front and back side of the air fi lter
Check that the front and back side are
secured when the air fi lter is attached.
No distinction of up and down.
How to clean
Wash and dry.
Rinse well after washing with the weak laundry soap (weak Alkali
or pH neutral).
Remove all dirt from the teeth of the gear at the back side of the air
fi lter or air fi lter frame.
After washing, wipe away any water with a dry cloth or dry in the
shade, completely dry it and attach it.
Notes
•
Do not use bleach. It may cause a fault.
•
Do not rub with a scrubbing brush.
•
Do not dry with hot air from a hair dryer etc. (It may deform from the heat).
Air fi lter Brush frame
Ensure the inserting of air fi lter into the brush frame.
Front
side
Back
side
The gear teeth
1110650159_(21-30)_EN.indd 30
1110650159_(21-30)_EN.indd 30
2/28/11 2:10 PM
2/28/11 2:10 PM