Filter
Top Products
Dust Box
Care and cleaning
(continued)
Turns off power supply before checking,
care and cleaning
28
How to remove it
1. Slide the fi xing levers (4 points) of the dust box
Slide the fi xing levers (4 Orange
points) at left, right and center
toward the direction of
and
until they click.
2. Remove the dust box
Hold and remove from the right side and pull it
horizontally to remove.
How to assemble
Assemble in the reverse sequence of removing.
1. Assemble the dust box.
Fit the triangular tab of the dust box into the left slot in the
body and insert it. Then fully insert the right side.
2. Slide the fi xing levers (4 points) of the dust box.
Slide the fi xing levers (4 Orange points) at the right, left and
center of the dust box toward the direction of
until it stops.
How to clean
Remove 3 clicks (3 points) and remove dust with a vacuum
cleaner.
•
Place a vinyl sheet under the dust box to collect any dust.
•
If very dirty, wash with water. After washing, wipe with a dry cloth or
dry it in the shade and assemble it after completely dry.
Release Release
Fixing lever (Orange)
Dust box
Slot
Click Dust box Click Click
1110650159_(21-30)_EN.indd 28
1110650159_(21-30)_EN.indd 28
2/28/11 2:10 PM
2/28/11 2:10 PM