Filter
Top Products
Page 42
7046-137C
December 15, 2009
R
2700-I ACC Wood Insert
Surround & Trim Kit Installation (Cont’d)
6. Align the 2 screws in the top surround piece to the 2 align-
ment holes on the appliance top. Figure 42.2.
7. Align the surround slots to the lower pins on the appli-
ance, one on each side. Figure 42.3
Alignment Hole
in Appliance Top
Alignment Screw
in Surround Top
Surround
Alignment
Slot
Alignment
Pin on
Appliance
Star-Up Air
Control
Figure 42.1
Figure 42.2
Figure 42.3
G. Top Installation Instructions
Surround Top
Top
NOTE: The top is packaged separately and shipped with
the appliance. Install after the appliance is in place and
the installation of the surround and trim are complete.
1. Push the top into place by aligning the pins into the
slots. Figure 42.4.
2. Press down into position.
Figure 42.4