Filter
Top Products
Page 2
7046-137C
December 15, 2009
R
2700-I ACC Wood Insert
SAMPLE
Serial Number
Model Name
Test Lab & Report
Number
Mfg Date
Model:
2700-I
ACC
WOOD INSERT
Report:
#061-S-78-6.2
Made in U.S.A
.
U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to comply with July 1990 particulate emission standards.
2010 2011 2012 Jan Feb Mar Apr May June July Aug Sept Oct. Nov. Dec.
LISTED ROOM HEATER, SOLID FUEL TYPE. "For Use with Solid Wood Fuel Only."
Also for use in Mobile Home.
DO NOT REMOVE THIS LABEL
7046-153
Manufactured by:
R
HOT WHILE IN OPERATION DO NOT TOUCH, KEEP
CHILDREN AND CLOTHING AWAY.
CAUTION:
TESTED TO:
UL 1482, ULC S628-93
Install and use only in accordance with manufacturer's installation, venting and operating instructions.
CONTACT YOUR LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION
IN YOUR AREA
Refer to manufacturer's instructions and local codes for precautions required for passing chimney through a combustible
PREVENT HOUSE FIRES
No Thermal Floor Protection Required in USA
Ember Floor Protection Required on All Installations
Minimum Clearances To Combustible Material
Masonry, Heat Circulating & Zero Clearance
USA ONLY
A Sidewall to Stove 19-3/4 in.
B Mantel to Stove 21-1/2 in.
C Top Trim to Stove 14 in.
D Side Trim to Stove 13 in.
E Hearth Extension from Glass
Floor height 0 in. to 3-1/2 in. below insert base 18 in.
Floor height greater than 3-1/2 in. below insert base
16 in.
F H
earth Extenson from Side of Insert
8 in.
CONTACT MAY CAUSE SKIN BURNS. KEEP FURNISHINGS AND OTHER
COMBUSTIBLE MATERIAL FAR AWAY FROM THE APPLIANCE. SEE
NAMEPLATE AND INSTRUCTIONS.
1445 N. Highway, Colville, WA 99114
www.quadrafire.com
Refer to Clearances on reverse side for Canada
Serial No / Numéro De Série
007013
Mantel
Hearth Extension
A
B
C
F
E
Insert
SideWall
Maximum Mantel Depth - 10 inches (254mm)
Fascia or Trim
D
O-T L
Tested and
Listed by
Portland
Oregon USA
OMNI-Test Laboratories, Inc.
C
US
Hearth & Home Technologies welcomes you to our tradition
of excellence! In choosing a Quadra-Fire appliance, you
have our assurance of commitment to quality, durability, and
performance.
This commitment begins with our research of the market,
including ‘Voice of the Customer’ contacts, ensuring we
make products that will satisfy your needs. Our Research
and Development facility then employs the world’s most
advanced technology to achieve the optimum operation
of our stoves, inserts and replaces. And yet we are old-
fashioned when it comes to craftsmanship. Each unit is
meticulously fabricated and gold and nickel surfaces are
hand-nished for lasting beauty and enjoyment. Our pledge
to quality is completed as each model undergoes a quality
control inspection.
We wish you and your family many years of enjoyment in
the warmth and comfort of your hearth appliance. Thank
you for choosing Quadra-Fire.
SAMPLE OF SERIAL NUMBER / SAFETY LABEL
LOCATION: UNDER INSERT RIGHT SIDE PANEL - SWIVEL OUT TO VIEW
and Welcome to the Quadra-Fire Family!
NOTE: Clearances may only be reduced by means
approved by the regulatory authority having jurisdiction