Getting Started
8
1Table of Contents
1Setup
1.1 Using the Remote Control
1.1.1 Preparing the Remote Control
The remote control included with the BL-WV10 is required for most operations.
Insert the included batteries as shown below.
1.1.2 Basic Remote Control Operation
The remote control’s navigator
keys are used to navigate
through the BL-WV10’s
on-screen menus and to select
on-screen items. The RETURN
button is used to return to the
previous menu. The ENTER
button is used to select a menu
item or parameter.
When using the remote control
with the BL-WV10, make sure
you aim the remote control
toward the unit’s remote control
sensor.
Insert the batteries,
positioning the and
poles as indicated.
While pulling the cover
toward you, lift it up.
Align the cover and
press down until it
snaps into place.
RETURN
Navigator
keys
ENTER
Remote control sensor
BL-WV10_GS-en.book Page 8 Wednesday, January 25, 2006 5:18 PM