Panasonic BL-WV10 Home Security System User Manual


 
Getting Started
2
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not install this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce heat.
6. Protect the AC adaptor cord and AC cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where they exit
from this product.
7. The AC cord is used as the main disconnect device. Ensure that the AC outlet
is located/installed near the product and is easily accessible.
8. Use only the included Panasonic AC adaptor and AC cord.
9. The AC adaptor must remain connected at all times. (It is normal for the
adaptor to feel warm during use.)
10. To prevent the risk of fire or electrical shock, do not expose this product to rain
or any type of moisture.
11. Do not touch the product or the AC adaptor and AC cord during lightning
storms.
12. Unplug this product when unused for a long period of time.
13. Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as when the AC adaptor, AC cord
or plug is damaged, the unit does not operate normally, or after the unit has
been dropped.
14. Certain Network Cameras are intended for indoor use only. Never use an
indoor camera outdoors.
15. Unplug this unit from power outlets if it emits smoke, an abnormal smell or
makes unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped and contact an authorised service centre.
SAVE THESE INSTRUCTIONS
BL-WV10_GS-en.book Page 2 Wednesday, January 25, 2006 5:18 PM