Filter
Top Products
Getting Started
21
English
1.6 Adding More Cameras to the System
Up to 8 cameras can be registered to the BL-WV10. If you purchase additional
cameras later, you can register them using the Quick Setup utility by following the
same procedure used to register your existing cameras.
You can repeat the setup procedure and register new cameras by setting the mode
switch to SETUP and turning the unit off then on again. After the Quick Setup utility
starts, see page 10 or page 15 for details.
1.7 Entering Characters with the Remote Control
Characters (letters, numbers, and symbols) can be entered using the remote
control when setting camera names, user names and passwords, etc.
Use the navigator keys to select the
desired character, then press ENTER to
copy the character to the text field in the
upper-left part of the screen.
You can erase characters, beginning with
the last entered character, by pressing 1.
When you have finished, press STOP to
use the entered characters. You will
return to the previous screen
automatically.
BL-WV10_GS-en.book Page 21 Wednesday, January 25, 2006 5:18 PM