Filter
Top Products
Getting Started
16
1.4.2 Easy Network Setup (When Not Using a Router)
After the BL-WV10 starts up for the first time, the [Easy Network Setup] screen is
displayed. Here you can set the administrator user name and password.
1. Confirm that the [Easy Network Setup] screen is displayed.
2. Use the navigator keys to select [User Name], then press ENTER.
3. Enter the administrator user name (6 or more characters and/or digits), then
press STOP to save the setting.
• For instructions on entering characters, see page 21.
4. Select [Password], then press ENTER.
5. Enter an administrator password (6 or more characters and/or digits), then
press STOP to save the setting.
6. Select [Next], then press ENTER.
7. When the following screen is displayed, select [Yes], then press ENTER to
use the BL-WV10’s Quick Setup utility to configure the cameras (see
page 17).
BL-WV10_GS-en.book Page 16 Wednesday, January 25, 2006 5:18 PM