Filter
Top Products
27
VN-C10 is equipped with an access protection (security) function that, by setting
passwords, regulates users of the connected PC.
Setting and cancellation of passwords can be performed with [V.Networks Setup
Tool].
According to access right (authorization) levels, up to 3 passwords (user, operator and administrator)
can be set.
Access Right Level Allowed Actions
User Only viewing moving images
Operator All operations with [V.Networks Controller]
Administrator All of the above and all settings with [V.Networks Setup Tool]
2-4 Other Settings with V.Networks Setup Tool [1. Password Setting]
1.
Start up [V.Networks Setup Tool] and select [User], [Operator] or [Administrator].
2.
The following screen is displayed for confirmation.
Note
● For a password-protected VN-C10, the password request screen appears.
● VN-C10 cannot be set up unless the correct administrator password is entered.
● The security level is highest for the administrator and lowest for the user. If password is set
only for lower security level(s), password protection is not effective.
Click
.
Enter a password to set password protec-
tion or change the password. Entered char-
acters are displayed as asterisks (*).
• Enter the same password for both boxes.
•A password must be alphanumeric and
can be up to 8 characters.
Note
To cancel an existing password,
leave the password entry box blank
and click
.
Note
Do not forget the passwords as they cannot be changed unless the current, and correct ones
are entered.
Click
.
VN-C10_E_01-43.pm65e 14/04/03, 10:13 AM27