Filter
Top Products
15
1-3 Connecting a LAN Cable
Connect the camera to a hub or a PC by using a LAN cable.
Note
For 100 BASE-TX, use a CAT-5 cable.
POWER
G
2
21
1
OUT COM
ALARM
DC12V
AC24V
OUTPUT
INPUT
PUSH
CLASS 2 ONLY For USA
ISOLATED POWER ONLY
For EUROPE
10BASE-T/100BASE-TX
For USA
DO NOT CONNECT TO THE
TELEPHONE NETWORK
• For hub connection
Use a straight cable.
• For PC connection
Use a cross-over cable.
Caution
There are a few types of LAN board for
which a cross-over cable cannot be used.
Check the specifications of the LAN board
to be used before performing connection.
VN-C10_E_01-43.pm65e 14/04/03, 10:13 AM15