Filter
Top Products
22
2-2 Setting the PC’s IP Address for Windows 2000
Preparations (Step 2 Setting the Network)
After attaching the camera, proceed to set the IP address of the PC by which the
camera is operated.
With Windows 2000, follow the procedure below to set the IP address.
1.
Click .
Select [Settings] and click [Control Panel].
2.
Double-click [Network and Dial-up Co...].
3.
Double-click [Local Area Connection].
Select [Internet Protocol (TCP/IP)].
Click [Properties].
VN-C10_E_01-43.pm65e 14/04/03, 10:13 AM22