Filter
Top Products
Maintenance – Single-Phase Motors & Controls
NOTE 1: Control boxes supplied with QD Relays are
designed to operate on 230 volt systems. For 208 volt
systems or where line voltage is between 200 volts and
210 volts use the next larger cable size, or use a boost
transformer to raise the voltage.
NOTE 2: Voltage relays kits for 115 volts (305102901)
and 230 volts (305102902) will replace current, voltage
or QD Relays, and solid state switches.
(1) For Control Boxes with model numbers that end with 4915.
Table 48 QD Control Box Parts 60 Hz
Table 48A QD Capacitor Replacement Kits
Table 48C QD Relay Replacement Kits
Table 48B Overload Kits 60 Hz
HP VOLTS
CONTROL BOX
MODEL NUMBER
QD (BLUE) RELAY
START
CAPACITOR
MFD VOLTS
RUN
CAPACITOR
MFD VOLTS
1/3
115 280 102 4915 223 415 905 275 464 125 159-191 110
230 280 103 4915 223 415 901 275 464 126 43-53 220
1/2
115 280 104 4915 223 415 906 275 464 201 250-300 125
230 280 105 4915 223 415 902 275 464 105 59-71 220
230 282 405 5015 (CRC) 223 415 912 275 464 126 43-53 220 156 362 101 15 370
3/4
230 280 107 4915 223 415 903 275 464 118 86-103 220
230 282 407 5015 (CRC) 223 415 913 275 464 105 59-71 220 156 362 102 23 370
1
230 280 108 4915 223 415 904 275 464 113 105-126 220
230 282 408 5015 (CRC) 223 415 914 275 464 118 86-103 220 156 362 102 23 370
CAPACITOR NUMBER KIT
275 464 105 305 207 905
275 464 113 305 207 913
275 464 118 305 207 918
275 464 125 305 207 925
275 464 126 305 207 926
275 464 201 305 207 951
156 362 101 305 203 907
156 362 102 305 203 908
QD RELAY NUMBER KIT
223 415 901 305 101 901
223 415 902 305 101 902
223 415 903 305 101 903
223 415 904 305 101 904
223 415 905 305 101 905
223 415 906 305 101 906
223 415 912 (CRC) 305 105 901
223 415 913 (CRC) 305 105 902
223 415 914 (CRC) 305 105 903
HP VOLTS KIT (1)
1/3 115 305 100 901
1/3 230 305 100 902
1/2 115 305 100 903
1/2 230 305 100 904
3/4 230 305 100 905
1 230 305 100 906
48