Filter
Top Products
infiNET™ Thermostat Crestron CHV-TSTATRF
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the CHV-TSTATRF, it is
recommended to use SystemBuilder or D3 Pro for configuring a system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
• To incorporate the CHV-TSTATRF into the system, first drag the
C2N-MNETGW (MNET Gateway) from the Wireless Receivers | Wireless
Receivers (RF) folder of the Device Library and drop it in the System
Views. Then drag the module from the infiNET Control Modules | infiNET
Sensing Modules folder of the Device Library and drop it on the
C2N-MNETGW.
NOTE: It is not recommended to add the CHV-TSTATRF directly.
Instead, add one of the available “modules” listed underneath it as shown
below.
Locating the C2N-MNETGW in the Device Library
Locating the CHV-TSTATRF in the Device Library
• The system tree of the control system displays the device in the appropriate
slot with a default MNET ID as shown in the following illustration.
28 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC. 6490