Filter
Top Products
R
EPLACING THE
TEMPERATURE
CONTROLLER
(TIC)
Series 1 Portable Chillers, TIC Control UGH016/0500
6-18
TROUBLESHOOTING
Always refer to the wiring dia-
grams you received with your
chiller to locate specific elec-
trical components.
Disconnect and lockout power to the chiller.
Snap the Temperature Controller board out
of the mounting case by pressing the snaps on both sides
of the controller, and pulling outward at the same time.
Slide the new controller in until
it snaps into place.
Contact Conair Service for the temperature
setup list. This list tells you the correct settings for the
controller parameters.
WARNING: Electrical hazard
Before performing any work on this unit, discon-
nect and lock out electrical power sources to
prevent injury from unexpected energization or
startup.
1
2
3
4