Filter
Top Products
UGH016/0500 Series 1 Portable Chillers, TIC Control
OPERATION 4-7
C
HANGING
AUTO TUNE
MODE
CONT’D
Press the Menu button.
SP displays, flashing alternately with the cur-
rent setpoint temperature.
Use the Up/Down arrows to change
the setpoint temperature. Each time you press
an arrow, the displayed number changes one
unit.
Press Enter button.
The screen displays STBY and the new number.
Press Enter button and hold
for 3 at least seconds until FOP displays on the
screen.
Apply a load to the Chiller.
Use the Up/Down arrows to scroll
until ATUN displays on the screen.
Press the Enter/Mode button once.
The screen flashes ATUN. When auto tuning is
done the screen displays STBY.
Press Enter button and hold
for 3 at least seconds until FOP displays on the
screen.
Use the Up/Down arrows to scroll
to NOR on the screen.
Press Enter button.
Initiating Auto Tune is complete.
4
5
6
7
8
9
13
12
11
10
To return to the To Process
Temperature screen from
any other screen, press and
hold the button for at
least 5 seconds until the
temperature displays.