Filter
Top Products
UGH016/0500 Series 1 Portable Chillers, TIC Control
TROUBLESHOOTING 6-5
Symptom
The control is not lit
and the chiller is not
working.
Possible cause
Power is not reaching the
chiller.
The correct power is not
reaching the unit
There is a problem with
the TIC control.
There is a problem with
the control panel.
Solution
❐ Check the power cord and
plug. Make sure the cord and
plug are properly connected.
❐ Make sure the main discon-
nect switch is on.
❐ Check fuses and breakers.
Replace or reset as required.
Check the voltage specification
on the chiller nameplate.
❐ Check fuses and replace as
needed.
❐ Check the power to the tem-
perature controller. Reconnect
or replace as needed.
❐ Check the TIC indicator
lights and replace as needed.
The control panel may have
failed. Contact Conair Service.
C
ONTROL
PROBLEMS
Look here if the control panel is not lit, or if the power is on
and the Portable Chiller will not run.