Filter
Top Products
Z-8550A, 8560A
4. USING CF CARDS
30
4-8-2. Restoring the control program if an error occurs during version updating
If the version updating did not complete normally, such as because of a power outage, the sewing machine will not operate
correctly.
If this happens, restore the control program by the following procedure.
1
Insert the CF card containing the control program data into the CF card slot.
2
Set the power switch (1) to ON.
The operation panel will switch off and the version updating will be
carried out.
When the power turns back on, the updating is complete.
3
Set the power switch (1) to OFF and remove the CF card.
4453Q
0216B
0196B