Filter
Top Products
HE-800A
13. CHANGING FUNCTIONS USING THE DIP SWITCHES
83
ውዏ
-
ዎ
. Circuit board DIP switches
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall
outlet before opening the face plate of the control box. Touching areas where high voltages are present can
result in severe injury.
Always turn off the power supply before changing any of the DIP switch settings.
Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.
Circuit board DIP switch 1
No. ON/OFF Setting items Default
ON -
1
OFF -
OFF
ON -
2
OFF -
OFF
ON -
3
OFF -
OFF
ON -
4
OFF -
OFF
ON -
5
OFF -
OFF
ON -
6
OFF -
OFF
ON Three warning beeps
7
OFF Continuous warning beep
OFF
ON
Zigzag motor energization is turned off during pauses or when a
thread breakage occurs
8
OFF
Zigzag motor energization is not turned off during pauses or
when a thread breakage occurs
OFF
Note:
Move the switches properly.
3994Q