Filter
Top Products
HE-800A
5. OPERATION
31
ዑ
-
ዏ
-
ው
. Operating the standing operation pedal (option)
Note: Set the circuit board DIP switch 2 - No.1 to ON. (Refer to “13. CHANGING FUNCTIONS USING THE DIP
SWITCHES”.)
Three pedals
When the work clamp pedal (middle) is depressed, the
work clamp lowers, and when it is depressed once
more, the work clamp returns to the neutral position.
When the start pedal (right side) is depressed, sewing
starts.
When the work clamp lifter pedal (left side) is
depressed, the work clamp rises while the pedal is
being depressed. (functions in the same way as
depressing the treadle backward.)
When circuit board DIP switch 2 - No. 3 is set to ON, you can set the work clamp to lower while the work clamp
pedal is being depressed.
3908Q
Work clamp
pedal
Work clamp
lifter pedal
Start pedal