Filter
Top Products
HE-800A
5. OPERATION
33
ዑ
-
ዐ
-
ው
. Program setting examples
Example 1: How to make a buttonhole (round) setting for program number 3.
Set parameter number 01 to "buttonhole stitch
(round) setting value 3".
1. Press the SELECT key (1) to change the mode to
automatic, test feed or manual mode.
2. Press the program No. keys (2) and (3) to select the
program number 3, and then press the ENTER key
(4).
3. Press the SELECT key (1) to change the mode to
program mode.
4. Press the program No. keys (2) and (3) to select the
parameter number 01.
5. Press the parameter keys (5) and (6) to select the
parameter setting value 3, and then press the
ENTER key (4).
6. Press the SELECT key (1) to change the mode to
automatic mode.
A round buttonhole sewing pattern has now been
set for program No. 03.
3910Q
3911Q