Filter
Top Products
HE-800A
4. INSTALLATION
10
ዐ
-
ዑ
. Installing the power switch
1. Install the power switch (1) with the two screws (2).
2. Secure the power switch (1) cord and the motor (4)
cord with the six staples (3).
ዐ
-
ዒ
. Installing the bed base
1. Place the bed base (1) on top of the work table, and insert the four collars (2).
2. Provisionally tighten the four flange nuts (4) onto the four bolts (3), and then position the bed base (1).
3. Install the bed base (1) with the three flat washers (5) and wood screws (6), and then install the two rubber caps (7).
4. Remove the four bolts (3).
5. Set the magnet (8) in the position shown in the illustration.
3859Q
4069M