Filter
Top Products
HE-800A
4. INSTALLATION
11
ዐ
-
ዓ
. Installing the machine head
1. Place the two bed hinges (1) so that they are level
as shown in the illustration at left, and then place
the machine head gently on top of the bed base (3)
so that the cables (2) do not get clamped.
Note:
The bed base (3) is made from plastic, so be
careful not to hit it with the machine head when
placing the machine head on top of it.
2. Install the machine head with the four spring
washers (4) and four bolts (5).
Note:
Make sure that the felt support (6) do not touch
the bed base (3).
ዐ
-
ዔ
. Installing the head rest
Tap the head rest (1) into the table hole.
Note:
Tap the head rest securely into the table hole.
If the head rest is not pushed in as far as it will go,
the machine head will not be sufficiently stable when
it is tilted back.
3862Q
2778Q
3861Q