Filter
Top Products
HE-800A
5. OPERATION
28
(8) Program No. DOWN key
Press to decrease the value in the program number LED.
(9) Automatic mode indicator
Illuminates during automatic mode. The normal sewing mode is when the automatic mode indicator is illuminated.
(10) Test feed mode indicator
Illuminates during test feed mode. This mode is used to check the number of stitches in the sewing pattern.
(11) Manual mode indicator
Illuminates during manual mode. In this mode, a single stitch is sewn each time the machine pulley is turned
manually.
(12) Program mode indicator
This mode is used to set the various parameters for sewing programs.
If the program no. UP key and the ENTER key is pressed simultaneously while parameter setting is being carried
out, the mode changes to memory switch setting mode. If the program no. UP key and the ENTER key is
simultaneously pressed during memory switch setting mode, the mode changes to cycle program setting mode.
(13) SELECT key
This key is used to change between automatic mode, test feed mode, manual mode and program mode.
(14) Parameter display LED
• In automatic mode, this display shows the production counter, lower thread counter or error codes.
• In test feed mode and manual mode, the number of stitches remaining is displayed.
• In program mode, the parameter details are shown.
(15) Parameter UP key
Used to increase parameter values.
(16) Parameter DOWN key
Used to decrease parameter values.
(17) ENTER key
Used to accept a program number during automatic mode. Used to accept changed values for parameter settings
during program mode.
If you depress the treadle to start the sewing machine while the ENTER key is being pressed during automatic
mode, only the sewing machine will operate and the mode will change to lower thread winding mode.