Filter
Top Products
HE-800A
4. INSTALLATION
7
ዐ
. INSTALLATION
CAUTION
Machine installation should only be carried out by
a qualified technician.
Contact your Brother dealer or a qualified
electrician for any electrical work that may need
to be done.
The sewing machine weighs approximately 56 kg.
The installation should be carried out by two or
more people..
Do not connect the power cord until installation is
complete, otherwise the machine may operate if
the treadle is depressed by mistake, which could
result in injury.
Use both hands to hold the machine head when
tilting it back or returning it to its original position.
If only one hand is used, the weight of the
machine head may cause your hand to slip, and
your hand may get caught.
All cords should be secured at least 25 mm away
from any moving parts. Furthermore, do not
excessively bend the cords or secure them too
firmly with staples, otherwise there is the danger
that fire or electric shocks could occur.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Install the belt covers to the machine head and
motor.
ዐ
-
ው
. Table processing diagram
x The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration
of the sewing machine.
x The method for processing the table will vary depending on whether the positioning method is vertical or horizontal.
Make the holes in the correct places while referring to the table processing diagram which matches the positioning
method.
[Vertical positioning]
4091M