Filter
Top Products
D1265 | Owner's Manual | Appendix
Bosch Security Systems, Inc. | 9/10 | F01U169130-02 87
System Trouble Displays
If you refer to any of the system trouble displays
shown below, contact your security company to
determine whether repairs are needed.
The Silence button is only shown if a
trouble tone is present. Press the Silence
button to silence the following trouble
conditions.
Call for Service
Call your security company. Your security system
might have failed (Your Alarm Company is
replaced with the name of your security company).
Service Battery Low
Indicates the security system’s battery is low, or
temporarily draining faster than the system can
charge it. If this display remains or appears
frequently, call your security company for service.
Service AC Failure
Indicates that AC power to the security system is
interrupted. Check the plug-in transformer and
circuit breaker. Entering CMD 4 silences the
trouble buzz. The display clears when AC power
returns.
Serv Battery Missing
Indicates the security system’s battery is
disconnected or shorted.
Service Communication Fail
Your security system makes repeated attempts to
communicate with the security company.
In the event your security system fails to
communicate, the keypad buzzes and shows
Comm Fail Route Grp1 (Route Group number can
be from 1 to 4).
Notify your security company of the communication
trouble.
Service Keypad
Indicates that a keypad, other than the one
displaying the message, is in a trouble condition.
Notify your security company.
Service Phone Line #1 (or #2)
Indicates telephone line trouble. Call your phone
company from another phone to report telephone
trouble. This message might not appear in some
systems.